Wall Mounted Split Systems

This system is ideal for a smaller area or room. Reverse Cycle Wall Mounted Split Systems are an efficient way to HEAT and COOL.

There are a number of different types of Wall Mounted Split System installations available, depending on the location of the indoor unit in relation to the outdoor unit.

Some of these installation options are illustrated on the right including:

  1. Direct BACK to BACK Installation
  2. Installation with an INTERNAL PIPE RUN
  3. Outdoor Units including UNDERGROUND Pipe work.

At DACS, our experienced tradespeople will offer the best installation advice to suit your individual needs.

No job is considered too small or large at DACS. We treat all business with the same degree of attention to detail and urgency.

 


High Wall


Wall Brackets

Internal External

1. Direct Back to Back Installation
This type of installation is when the Indoor Unit is located on the inside of an external wall and the Outdoor Unit is located directly behind on the external wall. This install includes 3m of copper pipe run and 15m of electrical conduit back to the electrical switch board. The external motor can then either be placed directly on par blocks on the ground, or can be elevated and placed on brackets.

2. Installation with an Internal Pipe Run
This type of installation is required if the Indoor Unit is not placed on an external wall. This requires the copper pipe to run internally to an exit point where the outdoor unit will be placed.
Lumni College

3. Outdoor Units including Underground Pipe work.
Larger installation jobs, including offices and schools can require mounting on brackets and undergound pipe work.